How to pair Philips Remote Control with your hearing aids

Connecting your hearing aids to a remote control allows you to adjust the volume and program on your hearing aids and other devices.

Before you start

Before you can use your remote control with your hearing aids, the devices need to be paired.

You can choose to pair the remote control one hearing aid at a time or with two hearing aids at the same time. If you pair your hearing aids one at a time, you’ll need to repeat the pairing process for the second hearing aid.

The remote control can operate up to two hearing aids at a time. After you have paired two hearing aids to the remote control, both will be adjusted at the same time.

See more about Philips Remote Control

How to pair hearing aids with Philips Remote Control

1

Check the batteries in your remote control

Press any button to check that the status indicator light illuminates.

If the batteries are running low, the status light will blink rapidly whenever a button is pressed. In this case, replace the batteries.

2

Restart your hearing aids to activate pairing mode

Turn your hearing aids off and then on again.

  • For hearing aids with disposable batteries, open the battery drawers and then close them.
  • For rechargeable hearing aids, turn them off by pressing the lower button of each hearing aid for three seconds. Then turn them on again by pressing the lower button of each hearing aid for two seconds. Alternatively, put them in the charger and then take them out again.
3

During the pairing process

  • For hearing aids with disposable batteries, close the battery drawer.
  • For rechargeable hearing aids, turn them on by pressing the lower button of each hearing aid for two seconds.

The hearing aids are now ready for the first connection with the Philips Remote Control. You now have three minutes to complete the pairing.

4

When you use the remote control

When you use the remote control to adjust your hearing aids, you will hear a sound to confirm the action has been performed.

You can operate your hearing aids with the remote control from a distance of up to 1.8 metres (3.3 feet).

5

Unpairing hearing aids from the remote control

To use the remote control with different hearing aids, you have to remove any other pairings.

To clear the current pairing, press and hold the three buttons together for five seconds.

When the status light on the remote control illuminates steady green for 10 seconds, the pairing has been cleared successfully.