How to pair your hearing aids with a computer

You can connect your PC to your hearing aids, to stream audio and have video or audio calls.

Before you start

You need to use a Philips AudioClip accessory to connect your hearing aids to your computer.

See more about Philips AudioClip

First, pair your hearing aids with your Philips AudioClip

alt
1

Ensure Philips AudioClip is powered off

Press and hold the multi-button for approximately six seconds until the power indicator is off.

2

Turn your hearing aids off

  • For hearing aids with disposable batteries, open the battery drawer.
  • For rechargeable hearing aids, turn them off by pressing the lower button of each hearing aid for three seconds.
3

Turn your hearing aids on

  • For hearing aids with disposable batteries, close the battery drawer.
  • For rechargeable hearing aids, turn them on by pressing the lower button of each hearing aid for two seconds.

Your hearing aids are now ready for the first connection with the Philips AudioClip. You now have three minutes to complete the pairing.

4

Turn Philips AudioClip on

Press and hold multi-button for approximately three seconds, until power indicator shows steady green.

Philips AudioClip will now search for your hearing aids. The status indicator will blink yellow.

5

Establish a connection

Place Philips AudioClip close to your hearing aids, at a maximum distance of 20 cm.

A successful connection is indicated by the status indicator showing steady yellow.

Next, connect the Philips AudioClip to your PC

Turn on your Philips AudioClip.

Go to your computer’s Bluetooth® menu.

Select Philips AudioClip and connect to it.